Most vulnerable to problems within the floor a year 
 Cabinet invisible places to province to province 

 Construction of concealed works best to cut corners 

 Fitted like the deep sea "for property owners, one can see in the next face child wall cracking, doors and windows lax floor muster so the quality is just a paper tiger, although the maintenance time and effort, but only the gun. The real fear is hiding in the decoration inside jerry-building, construction risks these "stab in the back". Some even professionals is difficult to see through a heart with trepidation for the time being can only move into new houses, and slowly look at where there is a problem to follow-up to maintenance and replacement. 

 Hardcover examination room should be eyes. Secretly replace the poor workmanship of materials and workers can only say that very hard to detect, but hidden in the construction process, cut corners to save costs, compromising quality and resulting in the small details of the security risks, professionals give you reminder the child, allow you to How much peace of mind to live a little bit. 

 ● floor: one year, the most prone to problems 

 Belong to the popularity of the ground material of the present floor, but in hardcover acceptance, in addition to ground muster wall joints lax will be found one, no matter from the construction quality, are only in use The process can be found. Power Dekor, Ltd. Marketing Director Wang Qingjiang In addition to the improper use of factors, the floor in one year most likely to expose the problem. 

 In the Beijing area, the humid summer heat, winter cold and dry, and the year must be going through a heating season, so the floor of the Beijing area most easily exposed within one year after installation, including from their own quality and installation, including The installation is particularly important. Wang Qingjiang For example, such as the ground from the dark "phenomenon is due to the installation surface is uneven or the floor itself is not enough expansion joints remain reasonable. Expansion joints in the flooring installation link is particularly important, experienced workers will be retained under the flooring material is installed with telescopic coefficient of expansion joints to protect the floor in the season, temperature and humidity changes, physical changes do not affect its use and quality, not the expansion from the dark. Which is related to the quality of the floor itself, the unity of a better selection of flooring, with a smaller scale coefficient, a better estimate in the installation. 

 In addition, during installation because the cutting was on the floor of the loss, in accordance with the installation specification, is shorter than 30 cm can not be used, but if in order to save costs, too short scrap wood reuse will happen. 

 Deluxe rooms, most of the flooring manufacturers will be responsible for the quality of their floor, but there are some cases will make consumers lodge complaints. Such as parquet, the relevant national standards for the overall thickness of a standard wood thickness is no specific standard, the measurement of non-professional is also very difficult, but the surface is too thin can reduce costs, but the effect of long-term use of quality. Wang Qingjiang, although consumers can use the precision vernier caliper measurement to ensure the overall thickness of the floor, but specific to the thickness of each layer within the layered, it can not be measured, and it is difficult complaints. 

 ● cabinet: the hidden part of the province to province to save the cost of overhead 

 Most consumers are concerned about the cabinet plate on the table texture the surface of children ", but for the installation of cabinets, concealed works is the key. The quality of the cabinet concealed works directly related to the cost of cost and use of quality, but most neglected part of consumers. 

 EU to send call center manager WANG Hong-yan, the cabinet if installation "cut corners" can "strike" a place very much, one of which is "Province screw". WANG Hong-yan, said screw in the hinge, the hinge is invisible from the exterior, so installation is also less difficult to find. For example, wall cabinet, the pendant on the screws, screw on the cabinet door hinge installation double only install a single row are recurring problems. 

 Table bearing is also a cabinet installation, easy to start an important part to save money. The length and weight of the table it needs strong support, in order to prevent its deformation should be installed on a circle of aluminum beams, in order to ensure that it does not appear to deformation, cracking. However, in order to save costs, the support of the table tend to a fire board instead of an entire fire board in use will gradually deformed, thus making the table to follow the deformation. WANG Hong-yan, said table Process makes its edges look very thick, but in fact the table is the standard thickness of 13 mm, put heavy objects, vegetable and other actions to generate a lot of pressure on the table, if the support is not in place, it is easy produce quality problems in the short term. 

 In addition, the basin below the cabinet body waterproof aluminum foil can also be easily relief. And material, or up from the material of the aluminum foil itself do not use metal to ensure long-term use aluminum foil, or area Shengliao, only laying a small area aluminum foil on the bottom, unable to fully play inside the cabinet under the basin waterproof, moisture-proof effect. 

 ● hidden works: cut corners seriously affect the quality of construction 

 The majority of owners do not trust the hardcover because he had never in site supervision, construction techniques, to the use of materials and then the technical workers are not clear, problems arise when it is easy to be thrown off balance. 

 At the construction site, in addition to the individual skills of workers and steal less, substitution of materials, there are some details of the process is omitted, it is easy to have an impact on the future use of quality. 

 Wall keel: keel wide interval will save a lot of cost, from the appearance can not be found, but affect the strength of the wall. 

 Gypsum board thickness: partition should use the 12 mm thickness of gypsum board in order to save costs may be replaced with 9 mm thickness of gypsum board. 

 Ceiling pendant: wire, plastic is cheap and not professional material will be used to replace the professional metal hanging pieces will use security 
 .